Volume flow monitors from DURAG GROUP provide reliable continuous measurements following different measuring principles. Depending on the application, these measuring principles guarantee reliable measurements even under challenging plant conditions. The high quality of the measurement is ensured by our certified solutions following regulatory requirements such as QAL1, MCERTS and US EPA. Additionally to their suitability for official emissions reporting, the measurements from our volume flow monitors can be used for process control and optimization.
D-FL 100
Our volume flow monitor D-FL 100 provides an in-situ measurement of flue gas velocity and volume flow based on the principle of differential pressure. The D-FL 100 is suitable for use in small to large ducts with diameters from 0.4…9 meters. Each device is individually adapted to the application to deliver precise measurements and the material can be chosen to resist even corrosive and very hot and dry flue gases up to 850 °C. The D-FL 100 is available for indoor, outdoor and explosion protected installations.
D-FL 220
Our volume flow monitor D-FL 220 provides contactless in-situ measurement of flue gas velocity and volume flow based on the principle of ultrasonic transit time. The double-sided installation provides measurements over the entire diameter of small to very large ducts ranging from 0.5…14 meters and with temperatures up to 300 °C. Due to the contactless measurement it has a long life time and high availability even under extreme plant conditions with humid and aggressive flue gases. The D-FL 220 is available for indoor and outdoor installations.