Wireless ambient gas sensor with LTE and LoRa wireless transmission

The iSens can use different types of sensors to achieve a wide variety of configurations, allowing the measured gas reading to be transmitted to the GasVisor central or to the SensoTrak software for fast and accurate measurement of all types of gases. Among sensors, we can choose these Electrochemical for oxygen and toxic gases, catalytic and infrared for flammable gases, infrared for CO2 and PID for Volatile Organic Compounds. The iSens comes ready to be easily installed, only needing to be placed at the measurement point for the electrochemical sensors as it has an internal battery for continuous use for two years. An iSenso network can be connected to a GasVisor LoRa or SensoTrak cloud software via LTE modem, which will monitor the status of each of the sensors to indicate alarm conditions and sensor status, with a wide variety of controls, prompts and options. The transmission distance of the iSens LoRA reaches up to 7 km. LoS (Line of Sight). In urban or industrial environments this distance will be reduced depending on the obstacles that are between the emitter and the receiver. One kilometer distance is very likely in typical environments. In the case of iSens LTE, when using 3G/4G mobile phone networks, the signal will be received regardless of distance. In case of signal loss or low battery, the control panel detects the incident and alerts the user.