ASM90-WN08 Shoulder Milling


Achteck is launching a 90 degree shoulder milling cutter ,mounted with a triangular double sided, six cutting edges insert, providing a very good shoulder milling solution. Six cutting edges insert provides an economical solution to reduce machining cost. This new cutter with 90 degree kappa angle is ideal choice for shoulder milling. Three geometry MM3、 MM4 and MR2 combined with Achteck’s CVD and PVD coating technology provides exceptional performance. ASM90-WN08 can achieve excellent performance, tool life, surface quality and minimal mismatch. Suitable to machining steel, stainless steel, cast iron,super alloy and other materials. The insert WN08..W has a long wiper geometry provides a good surface finish and high productivity. Six cutting edges negative inserts,good economy, strong large rake angle geometry, thickness 7.88. Three kinds of geometry,MM3、 MM4、 MR2, all with short wiper cutting edge, will obtain better surface roughness; Mounted with long wiper insert, it can obtain good surface roughness and maching efficiency. Corner radius of insert are R0.4/0.8/1.2/1.6; Positive rake angle insert, reduce cutting force. 6 differnent grades which cover a wide application area. AP301U,AP351U,AP351K,AP401U,AC301P,AC301K; Precise 90 degree shoulder milling cutter, cutter body diameter range: Ø 40-Ø160 mm; Three kinds of pitch design, coarse design are mainly used for slot milling and shoulder milling,close tooth design are mainly used for shoulder milling, extra close tooth design is mainly used for short chip materials and finishing machining. Light cutting behavior, benifits from the positive rake angle design; High-precision axial and radial run-out; The cutter design has a variety of interface forms: screw modular type, cylindrical type, weldon type and shell mill (Arbor). Shining Nickel-plated cutter has good corrosion resistance and wear resistance.
Achteck ToolEstande virtual | ACHTECK TOOLGanzhou Achteck Tool Technology Co., Ltd. is a wholly-owned subsidiary of Chongyi Zhangyuan Tungsten Co., Ltd. (Listed Company with stock code 002378).It was established in 2007, located in Ganzhou Economic Development Area, with an area of 200,000 m².The registered capital of Achteck is 1.65 billion Yuan. Achteck has world class cemented carbide tool production technology. Achteck products can be widely applied in Petroleum, electric power, iron and steel, CNC machine tools industries and fields.  Advanced production technology         ◆ High performance and high precision cemented carbide coated inserts production line. Total investment was839 million Yuan. Based on the standard of “Top level in Technology, Equipment and Automation over the world”, by importing advanced production technology for cemented carbide coated inserts and tooling, and selecting the most advanced production, R&D and inspection equipment, Achteck established the production line of 10 million pcs(100 tons / year) coated inserts annual output. Product series are covering turning and milling inserts in cast iron, steel, stainless steel and other applications.         ◆ With a total investment of 480 million Yuan and introduction of German process and machineries, another high performance carbide rods production line was built with an annual output of 400 tons of high-performance solid carbide drills (blanks).Achteck produces solid rods, rods with straight hole(s) and spiral holes in different sizes and dimensions. Blank rods are good choices for solid carbides such as end mills, drills, micro-drills and micro-mills.         Technical strength     Along the way, Achteck always sticks to the spirit of innovation, research and development by enhancing extensive cooperation with famous domestic &international colleges and universities, focuses on internal talent training. At the same time, company has introduced technical experts from domestic and foreign in this industry. As a result Achteck holds a strong R&D team. By the end of 2016 Achteck has developed products covering turning, milling and drilling technologies for all types of materials including steel, stainless steel, cast iron, aluminum alloy, super alloy and harden steel. Among all those products, the turning grades AC150P and AC250P, which are used for machining steel and has put into mass production and sales, has won 2016 Jung Garl Gustarv Technology Innovation Award.         At present Achteck owns 4 patents of inventions, 11 practical new patents, 7 design patents of appearance and 4 Germany design patents of appearance. Achteck has established standard and high-efficient internal control management system, carried out 6S management and passed ISO9001 quality management system. Meanwhile Achteck strengthens on the work of Party building, which involves combination and deep integration between Party building and company development, to support development of Achteck in a quicker manner.         Future Development         Seeing ‘Benefit from Resources, Reliance on Technologies, Devotion to Humanity and Top with Trust’as operation philosophy and ‘Safety, Harmony, Efficiency and Innovation’ as target, Achteck keeps self-innovation along with research and development. In the next five to ten years, to transfer advantage in raw material towards technology and industry, Achteck will continue import world advanced techniques, machineries and management concept, speed up expanding high performance cemented carbide coated inserts and establishment of soft steel and solid carbide projects. All these projects would serve current products, coated inserts and blank rods. More particularly it would increase competitiveness of Achteck and help Achteck become a first-class cemented carbide manufacturer in China.